Connections (continued), Audio connections, Unit amplifier speaker – Panasonic OMNIVISION PV-DM2791 User Manual

Page 12: Ready checklist, For your reference, Unit

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Connections (continued)

Audio connections

■ Unit Amplifier Speaker

Do the “Speaker ON/OFF system” steps on
page 47, and select "OFF.”

Unit

Ready Checklist

O Turn down the volume, then turn this unit, as well as

other equipment to be connected, off before
proceeding with connection.

□ Do not block ventilation holes of any of the

equipment and arrange them so that air can
circulate freely.

□ Read through the instructions before connecting

other equipment.

Manufactured under license from Dolby
Laboratories. “Dolby”, and the double-D

symbol are trademarks of Dolby Laboratories.
Confidential Unpublished Works.© 1992-1997

For your reference:

• Dolby Digital is a digital sound compression technique

developed by the Dolby Laboratories Licensing
Corporation. Supporting 5.1-channel surround sound,

as well as stereo (2-channei) sound, this technique

enables a large quantity of sound data to be efficiently

recorded on a disc.

• Linear PCM is a signal recording format used in CDs.

While CDs are recorded in 44,1 kHz/16 bit, DVDs are

recorded in 48 kHz/16 bit up to 96 kHz/24 bit.

• If you have a Dolby Pro Logic Surround decoder, you

will obtain the full benefit of Pro Logic from the same

DVD movies that provide full 5.1 channel Dolby Digital

soundtracks, as well as from titles with the Dolby
Surround mark. For information on Panasonic or

Technics Dolby Pro Logic Surround Sound Decoders

please contact your local dealer.