Panasonic OMNIVISION PV-DM2791 - Manual (Page 35)

■ Important;. If a remote control button does not work when pressed, press the vcr button on the remote
and try the button again.
Program End Search
Locates end point of recording for continuity.
1
Press SEARCH twice in Playback or
Stop mode to display PROGRAM
END SEARCH screen .
NUMBER
keys
SELECT
SET
REW
■FF
■SEARCH
PROGRAM END SEARCH
SEARCH STARTiFF
EXIT: SEARCH
Press FF
to start search.
To cancel,
press PLAY or STOP.
Example of Program End Search operation.
Flq.1 __________ PLAYBACK DIRECTION-----■
+
Program 1 Program 2 or BLANK
Press S_EARCH button t^Fnri PnIntI
FF
Ftp. 2________ _________________________________
[fprograml III y BLANK ||||j| PFOgFam 2 ||| BLANK ||
Press SEARCH button
FF
End Point!
Fiq.3 If search exceeds a few seconds in BLANK area.
Press SEARCH button
lljtl Program 2 |
f|Progr*ni t| 1 1 BLANK
i FF .rn
lEnd PointI
Upon locating end point...
The unit searches slightly past end point,
reverse searches, and plays the last few
seconds of the program, then stops.
+
Program i (BLANK)
Press SEARCH button
:REVERSE
.J SEARCH
If Program End Search is started very close
to an index mark, that mark may be
skipped over.
35