5 set the off time, Select the desired source, To confirm the piay timer – Panasonic SC-CH950 User Manual
Page 65: Press e] play to show □ play on the display
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
When the day setting automatically advances after mak
ing the ON time setting;
This system retains the ON/OFF time settings until you make
a new setting. In case you make a new ON time setting which
is later than the previous OFF time setting, the system auto
matically advances the day you set on the step 3. When you
reset the OFF time, the day setting will return to the original
setting.
5
Set the OFF time.
T SELECT A
0
Press one of SELECT to select "7”.
t I ^
MONTUEWEDTHum VOUAK
(SPWY 1 Off
“**
,
KJ u
SET
'
--------- V (5) Press SET.
f SELECT A
1
\
(.3} rT
6
SS 0n6 0<
wtLcO
1
10 SOIOCl
40
<
HaNTUCWEOtNUFn 1 VOUWi
Q
play
Z L f t n
-
h
' 1
u
C
@ Press SET.
Select the desired source.
For the timer play on the CD player, you can set sequential
play only.
For timer play on the tape, you can operate both decks 1 and
2 by the timer. When you load cassettes in both decks, deck
1
has priority.
© Press one of SELECT to select the de
sired source. Each time you press, the
display shows “CD”, "TAPE” and
“TUNER” in order.
f SELECT À
I
HONTUEWEDTHUFMl
>^PUWON
y
vouac
MAX
r Tl
1- 11
S
um
SET
I
"X
@ Press SET.
'
*
When you select TUNER, select a de
sired preset channel using SELECT,
and then press SET.
Be sure that you’ve set a compact disc or cassette tape before
proceeding to the step 7.
7
Press POWER STANDBY (!) /ON to switch the
power to standby mode.
Please confirm Q PLAY indicator appears on the display.
The timer play will start at the preset time with volume
gradually increasing up to the volume level you preset.
Notes;
•If the power is on, the timer will not function. The system must be
in the standby mode.
•The play timer will function until you exit the play timer mode.
(See right.)
■ To confirm the piay timer
Press E] PLAY to show □ PLAY on the display.
■SPLAY
While in the timer standby mode, press Q PLAY twice.
The display will show the ON time, OFF time, the source you select,
and the volume level in 3 seconds step.
Note;
When the play timer is functioning, do not press H PLAY to confirm
the timer setting. It cancels the timer-off time setting.
■ To exit the play timer mode
Press □ PLAY to go off □ PLAY.
(....... REPLAY
The play timer will not function, but the play timer setting will stay in
the memory.
To reset the timer setting after above operation, first press El PLAY
to display El PLAY, and then press POWER STANDBY (!)/ON to
switch the power to standby mode.
■ To enjoy the desired source after the timer set
ting is completed
1. Press POWER STANDBY (i>/ON to on.
2. Select the desired source.
Be sure to press POWER STANDBY (*)/ON to standby mode.
Even if you change the volume level or music source, the timer play
will start with the preset condition.
65