To adjust the reverberation sound, 2 turn jog to adjust the reverberation sound, To cancel the reverberation sound – Panasonic SC-CH950 User Manual
Page 57: Press on/flat
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
To adjust the reverberation sound
(Also available from the remote control. For step 2, press one
of EFFECT to adjust the effect.)
You can adjust the reverberation sound of the desired simulated
listening environments (SFP).
1
Press SFP to select the desired simulated lis
tening environment.
Each press of SFP advances the simulated listening environ
ment setting in the following sequence.
HALL—►LIVE-
t
(THTER)-i------
-DISCO
-CHRCH
(THTER) is for model SH-CH750 only.
2
Turn JOG to adjust the reverberation sound.
O' : To increase the effect
■
To decrease the effect
The shape of the equalization curve will change as you adjust the
reverberation sound.
Such adjustments will not affect the preprogrammed simulated
listening environment.
You can adjust the reverberation sound within the range described
below.
HALL:
1.2-3.2 sec.
LIVE:
10-50 mm. sec.
DISCO: 0.5-2.5 sec.
CHRCH: 3.5-5.5sec.
(THTER): 10-30 mm. sec.
(THTER) is for model SH-CH7S0 only.
■ To cancel the reverberation sound
(Also available from the remote control)
Press ON/FLAT.
OtUFLAT
The flat display will appear.
f l R l
57