Panasonic CF-M32 Series - Manual (Page 76)

Setup Utility
Power Management
Power Management
•Power Saving (Battery)-
' Power Saving (AC)----------
•Resume Timer-
Operation Setting-----------------
Power Switch
Panel Switch
PC Card Power
Automatic Hibernation
Battery Setting
[ Suspend ]
[ LCD Off ]
[ON
]
[ Never ]
when remaining capacity is low [ Suspend
This setting specifies whether the computer will
enter suspend or hibernation mode when the re­
maining battery capacity is low.
If it is enabled, the system will
resume from suspend mode at a
specified time.
Power Switch
Select the power switch function while
the computer is turned on.
Select [Suspend], [Hibernation] or
[Power Off]-
Panel Switch
Set the action to take place when the
panel is closed. Select [LCD Off] or
[Suspend].
PC Card Power
Set the power supply for the PC Card
during Suspend mode. Select [ON] or
[OFF],
Automatic Hibernation
Set the amount of time that must
elapse from when the computer enters
suspend status until it automatically
switches to hibernation status. Select
[Never], [5 min], [10 min], [30 min],
[60 min] or [ 120 min].
76