Dealing with problems, Starting up, Dealir>g with problems – Panasonic CF-M32 Series User Manual
Page 53
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
![background image](/manuals/653605/53/background.png)
Dealing With Problems
When a problem occurs, please refer to this page. If a problem appears to be related to a
software application, read the software related manual. If you still cannot troubleshoot
the problem, please contact Panasonic Technical Support.
# Starting Up
The
computer
doesn't work
• Check that connections are secure between the computer and
the AC adapter, and between the AC power cord and AC wall
outlet.
• The power will not turn on if the LCD panel is closed (i.e., if
the panel switch is depressed). Turn on the power after open
ing the LCD panel.
• Confirm that a fully charged battery pack is installed properly.
• Press the reset button on the computer's bottom side to reboot
the computer.
• Remove the AC adapter and battery pack, then reattach them
and start the computer again.
• Have the hard disk contents been corrupted?
In the Setup Utility, select [Supervisor Setup] and then change
the [Boot up Drive] in setting [FDD -> HDD]. Insert the Win
dows 95 Boot Disk in the floppy disk drive and restart the
computer. Check the hard disk contents.
Information on
the display screen
isn't visible.
The display may have automatically turned off due to the
power-saving function. Move the power switch to restore the
screen.
Has an [External display) been selected by the Video Setup in
the Setup Utility and connected to an external monitor?
If your computer is connected to an external display and the
internal LCD has been set to off, and the computer is placed in
the hibernation or suspend mode, the internal LCD will re
main in the off mode if the external display is not connected
when the computer is restarted. In this case, reconnect the ex
ternal display and reboot the computer.
is Displayed
Please input your password. If you have forgotten it, contact
Panasonic Technical Support.
The date and time
are incorrect.
You can set the date and time, through [Date/Time] in [Start] -
[Settings) - jContro) Panel] or the Date and Time Setup in the
Setup Utility.
If you continue to experience problems, the internal battery
maintaining the clock may need to be replaced. Please contact
Panasonic Technical Support.
53