Note – Panasonic CF-M32 Series User Manual

Page 25

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Enter the following settings under [Operation Setting] in

[Panasonic Power Management] (cépage 26)

* Panel Switch: Suspend

The system will enter suspend mode and the power indicator will blink green

when the LCD panel is closed. The system will resume when the LCD panel is
opened.

• Automatic Hibernation: Enabled

After the system enters the suspend mode, it will automatically change to hiber

nation mode when a preset length of time, set in the [Operation Setting], has

elapsed.

Tiirn Off PC Card in Suspend Mode: Enabled

The PC Card power is turned off in suspend mode.

NOTE>

If you plan to use only the battery pack or set the power management, it is
necessary to check [Allow Windows to manage power use on this com

puter] in [Start] - [Settings] - [Control Panel] - [Power]. If the check is
removed, the time may not be displayed properly when operation is re
sumed from the suspend or hibernation mode or the operating time with
the battery pack may become short (the power management function of
Windows does work).
When the modem is connected through a PC Card, [Wake up the computer
when the phone rings] in [Control Panel ¡-[Power] is disabled.