Panasonic CF-M32 Series - Manual (Page 52)

List of Error Codes
If a problem occurs with your hardware, [POST Start up Error(s)] is displayed along with
the error code(s), follow the on-screen instructions.
Setup: Setup Utility (Cépage 73) is started. Run [Load Default Settings (Non-PnP)].
Rerun the Setup Utility to input the appropriate operating environment
settings.
Exit: Ignore the error message(s), and restart the computer.
Code Description
062 Boot failure-default configuration used Default configuration in use
101 System Board Failure Interrupt controller failure
102 System Board Failure Timer 2 test failure
106 System Board Failure Diskette controller failure
151 System Board Failure Real-time clock failure
161 Bad CMOS Battery Dead battery
162 Configuration Change Has Occurred Configuration error
162 Configuration Error CMOS checksum error
163 Date and Time Incorrect Real-time clock is not updating
164 Memory Size Error Memory size error
201 Memory Size Error Memory data error
1780 Hard Disk Error Fixed disk 0 failure
52