Installing/removing the pc card, 2 9 removing the pc card (or the dummy card), 9 installing the pc card (or the dummy card) – Panasonic CF-M32 Series User Manual

Page 47: 3 turn your computer on

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Installing/Removing the PC Card

To remove a PC Card

Before removing a PC Card, go to [Socket Status) (in (Start] - [Settings] -
[Control Panel] - (PC Card (PCMCIA)]), select the PC Card slot and press

[Stop], When removing a CardBus type card, be sure to restart the computer.

Power off your computer (o-page 18)

Do not shut down using the suspend or hibernation mode.

. (©SQPvIM)}

Do not install or remove peripherals while your computer is in the suspend or

hibernation mode; abnormal operation may result.

9 Removing the PC Card

(or the dummy card)

0 Pull the button out and then press it.

Pull the PC Card the rest of the way out.

note

Dummy cards are provided at the time of

purchase. They provide protection for the

PC Card slots against such things as dust.

9 Installing the PC Card

(or the dummy card)

0 Simply slide the PC Card in until it snaps into 0

place.

(1) Pull the button out and return it to the original

position.

Please refer to the manual for each card on

how to install the card (insertion is typically

label-side up).

Turn your computer on

There are some PC Cards that require a special or updated device driver be in

stalled. Follow the instructions on the screen and read any related manuals on
how to install device drivers.