Panasonic CF-72 User Manual
Cf-72, Model no.cf-72 z
- 1 -
ORDER NO. CPD0010001C0
CF-72
Notebook Computer
© 2000 Matsushita Electric Industrial Co., Ltd.
All rights reserved. Unauthorized copying and
distribution is a violation of law.
Model Number Reference
This is the Service Manual for
the following areas.
M ...for U.S.A. and Canada
E ...for U.K.
G ...for Germany
F ...for France
S ...for Sweden
T ...for Italy
P ...for Spain
The models in the CF-72 series are numbered in accordance with the types of the CPU, LCD
and HDD etc. featured by the product.
WARNING
This service information is designed for experienced repair technicians only and is not designed for use by the general public. It does not contain
warnings or cautions to advise non-technical individuals of potential dangers in attempting to service a product. Products powered by electricity
should be serviced or repaired only by experienced professional technicians. Any attempt to service or repair the product or products dealt with in
this service information by anyone else could result in serious injury or death.
Model No.CF-72 Z
LCD type
3: for 13.3" TFT Color
HDD type / RAM size
F: 20 GB / 128 MB
Area
M: for U.S.A. and Canada
E: for U.K.
G: for Germany
F: for France
S: for Sweden
T: for Italy
Drive
B: CD-ROM drive
C: CD-ROM drive / SuperDisk drive
CPU type
N: for Intel Mobile Pentium III
Processor 700 MHz
Operating System
C: Microsoft Windows NT
D: Microsoft Windows 2000
E: Microsoft Windows 98
Document Outline
- 1. Specifications
- 2. Names and Functions of Parts
- 3.Technical Information
- 4. Diagnosis Procedure
- 5. Diagnostic Test
- 6. Disassembly/Reassembly
- 6.1. Removing the Battery Pack.
- 6.2. Removing the HDD Unit.
- 6.3. Removing the Palmrest Unit, the PAD PCB and the Touch Pad
- 6.4. Removing the RAM Card.
- 6.5. Removing the Keyboard.
- 6.6. Removing the LCD Section and the Center Cover
- 6.7. Removing the LCD Section and the LED PCB
- 6.8. Removing the PCB Case Unit
- 6.9. Removing the Bottom Case Unit and the Handle Unit
- 6.10. Removing the CD-ROM Drive
- 6.11. Removing the Main PCB
- 6.12. Removing the Fan and the Fan Heat Angle
- 6.13. Removing the Sub PCB
- 6.14. Removing the LID PCB
- 6.15. Removing the Bus Shutter Unit and the Card Shutter Unit
- 6.16. Removing the PCMCIA CN (PC Card Slot) and RTC Battery
- 6.17. Removing the LCD Unit and the Inverter PCB
- 6.18. Removing the LCD Lock and the LCD Lock Spring
- 6.19 Setting the Dip SW
- 7. Wiring Connection Diagram
- 8. Exploded Views
- 9. Replacement Parts List