Yamaha REX50 - Manual (Page 14)

This stereo delay effect offers independently variable
left and right channel delays.
/ 7. DELAY L&R /
(dB)
DIRECT
SIGNAL
L R
Lch
DLY
Rch
DLY
L C R
L C C R
(TIME)
This effect can be used to create expansive echo ef­
fects — with independently variable left and right chan­
nel echo delays and feedback.
/ 8. STEREO ECHO /
(dB)
DIRECT SIGNAL
L R
L R
Lch
DL\
Rch DLY
-(TIME)
Lch F.B
EFFECT
INPUT
EFFECT
INPUT
Rch F.B
Left Channel Delay (Lch DLY): 0.1 — 500.0 ms
Sets the time between the direct sound of the instru­
ment and the first repeat heard from the left channel.
Left Channel Feedback Gain (Lch F.B): -99% —
-F 99%
Sets the amount of the left-channel delay signal fed
back to the input of the processor. The higher the
feedback gain setting, the greater the number of
delayed repeats produced.
Right Channel Delay (Rch DLY): 0.1 — 500.0 ms
Sets the time between the direct sound of the instru­
ment and the first repeat heard from the right
channel.
Right Channel Feedback Gain (Rch F.B): -99% —
-F 99%
Sets the amount of the right-channel delay signal fed
back to the input of the processor. The higher the
feedback gain setting, the greater the number of
delayed repeats produced.
High Frequency Feedback (HIGH): 0.1 — 1,0
Controls feedback in the high-frequency range. The
high-frequency feedback is reduced as the value of
this parameter is decreased.
Left Channel Delay (Lch DLY): 0.1 — 250.0 ms
After the delay set by this parameter, the first left-
channel echo will appear. Subsequent echoes will
appear at the same time interval, the number of
echoes depending on the setting of the feedback
gain setting for the corresponding channel.
Left Channel Feedback Gain (Lch F.B): -99% —
-F 99%
Adjusts the number of echoes that follow the direct
signal — from zero to a virtually infinite number of
echoes at the maximum setting.
Right Channel Delay (Rch DLY): 0.1 — 250.0 ms
Same as Left Channel Delay, but affects the right
channel only.
Right Channel Feedback Gain (Rch F.B): -99% —
-F 99%
Same as Left Channel Feedback Gain, but affects the
right channel only.
High Frequency Feedback (HIGH): 0.1 — 1,0
Controls feedback in the high-frequency range. The
high-frequency feedback is reduced as the value of
this parameter is decreased.
1 3