Yamaha REX50 - Manual (Page 10)

STORING EFFECTS
In order to store an edited effect for later recall you
need to do the following:
© After editing the effect, select a memory location be­
tween 31 and 90 by first pressing the MEMORY key
and then using the A and V keys. Do not recall the
selected memory location.
@ Press the STORE key to store the edited effect in the
selected memory location. The title of the effect
stored will appear on the LCD (this may later be
edited to create your own effect title using the UTILI­
TY mode EDIT TITLE function). The LED memory
number display will stop flashing and the stored
memory location will become the active effect.
NOTE: You CANNOT store edited data to memory lo­
cations 1 through 30. If you attempt to do this
the LCD will show " * * ♦ READ ONLY *** MEM
NO. 1-30".
* * R E A D O N L Y * *
M E M N O . 1 - 3 0
NOTE: Once an effect has been stored in a memory
location between 31 and 90, its parameters
can be further edited in the new memory loca­
tion. Such changes will be lost if a different ef­
fect is selected and recalled, however, unless
the STORE function is used to store the
changes. Changes may be stored to the cur­
rent memory location number (31 —90) simp­
ly by pressing the STORE key.
'
<
\
D 1 S T . + S Y M P H O N 1 C
Edited program
New program
number
—flash —
Store program