6 shipping information, Disconnecting the display unit, 6. shipping information – Panasonic KX-E2500 User Manual
Page 243
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
12-6 SHIPPING INFORMATION
The carrier stopper keeps the printer stationary during shipping. Remove the stopper before turning
the unit on.
When you transport or ship the typewriter, be sure to follow the
steps below.
1
Position the printer at the far left of the unit
2
Install the carrier stopper on the carrier shaft so that the
' printer does not move
Disconnecting the Display Unit
If you need to move your system, you should disconnect the display
unit.
1
Turn the power off
2
Unfasten the two screws on the cable connector
3
Remove the cable from the connector
To reconnect insert the cable into the connector and tighten the
screws.
233