Panasonic KX-E2500 - Manual (Page 124)

CODE -(-
□
[SPACE BA^ /
Line Framing while Creating a Text in
Memory
Line framing while in text memory is just as easy as line framing
pre-prinied documents. When you set the frame corner, be sure to
return at least once and space once before typing the text. The
same applies when marking the bottom right corner. Be sure to
RETURN and set the frame corner at least one space to the right
of the text. The text to be framed cannot be typed at the left
margin. An indent must be set to indent the text, leaving enough
room for the box. You will not be able to see the box or lines
drawn unless you use the embed command
(CODE + =) to display
them.
1
Set the margins and tabs for your document
2
Create a new text
3
Return or space to the starting position of the box
4
Press CODE + L
Your screen will prompt:
FRAME CORNER WAS SET
5
Press RETURN
6 SPACE or TAB at least once
7
Press H IND
8
Type the text to be framed
9
Press H IND to deactivate the indentation
10
Press RETURN
11 Space to the bottom right corner of the text to be framed
Make sure you are at least one space to the right of the text.
114