Panasonic KX-E2500 - Manual (Page 128)

w
dual
cql
+
E
tJECT
Typing a Dual Column Text in Typewriter
Mode
The auto paper insertion point is the first line of print for the first
and second column. When typing a dual column text, CODE +
W advances from one column to the next positioning the printhead
to the first line of print (auto insertion point).
Before typing a dual column text, a Page End setting should be
set. The Page End setting is not mandatory; however, it will insure
that each column is the same length.
1
Recall the dual column format (X, Y, or Z)
Only the margins for the first column will be displayed on the
ruler line.
2
Set a Page End for the desired column length
3
Auto insert a sheet of paper
4
Type the first column
When the prompt “PAGE END” is displayed,
5
Press CODE + W to advance to the top of the second column
6
Type the second column
When the prompt “PAGE END” is displayed again,
7
Press CODE + E to eject the paper
8 Press CODE+ W
9
Repeat steps 3-7 for each typed page required
118