Panasonic KX-E2500 - Manual (Page 126)

Dual Column Typing
+
o
TABCLN
w
(MJAi.COL
w
¡DUAiCOl.
+
Your typewriter gives you the ability to type dual column projects
quickly and easily. This application is especially useful if you type
newsletters, newspaper copy, bulletins, or any other project requir­
ing two columns of information on a page. The typewriter enables
you to set two different margin formats on one line. Both margin
formats should be the same width so that the columns will look
uniform. The auto paper insertion point is the first line of print in
a dual column format: therefore, be sure you are at the desired
insertion point before printing.
The command CODE + W is used for all aspects of dual column
typing. It is used to set the dual column format. When typing the
dual column text,
CODE + W is used to advance from one column
to the next; and when typing in memory, it is also used to access
and exit the dual column typing mode.
Setting a Dual Column Format
1 Press CODE + TAB CLR
2 Set the left and right margin for the first column
3 Press CODE + W
These margins are remembered by the system. However, they
will clear from the ruler and the printhead will return to 0 so
the margins for the second column can be set.
4 Set the left and right margin for the second column
Be sure to set the left margin for the second column to the
right of the margins set for the first column.
5 Press CODE + W
The printhead will return to the left margin of the first eol-
umn.
6 Press CODE + F and store in ruler X, Y, or Z
The margins for the first and second column are stored as one
margin format.
116