Changing the correction tape – Panasonic KX-E2500 User Manual
Page 238
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Changing the Correction Tape
1
Lift out the ribbon cartridge and remove the two spools of
lift-off tape
2
Place the loaded spool of the new tape on the left pin
3
Feed tape around white spools. Place empty spool on the right
pin
4
Manually turn the right hand spool counter-clockwise, tight
ening the tape until resistance is felt
5
Replace the typing ribbon cartridge
228