Panasonic SC-HT70 - Manual (Page 9)

Attaching to a wall
В To attach vertically
Ш To attach horizontally
Attach four rubber feet to each speaker, ensuring they do not cover
the holes.
tmm
The surface you attach the speakers to must be able to support over
5 kg per screw.
Attaching to speaker stands
BBS
Ensure the following conditions are met when you purchase
your speaker stands.
• Observe the diameter and length of the screws and the distance
between screws as shown in the diagram,
• The stands must be able to support over 5 kg.
• The stands must be stable even if the speakers are in a high
position.
Moving the brand plate
You can rotate the brand plate if you choose to set up the small
speakers horizontally.
(Prevent damage to the plate by wrapping the end of the
screwdriver with cloth.)
Insert the screwdriver under the plate and lift it. Rotate the plate to
the required position. * •
If irregular coloring occurs on your television
These speakers are designed to be used close to a television,
but the picture may be affected with some televisions and set­
up combinations.
If this occurs, turn the television off for about 30 minutes.
The television’s demagnetizing function should correct the
problem.
If it persists, move the speakers further away from the
television.
• Set the speakers up on an even surface to prevent them from
failing. Take proper precautions to prevent the speakers from
falling if you cannot set them up on an even surface.
• The speaker nets cannot be removed.
Notes on speaker use
■ You can damage your speakers and shorten their useful life if
you play sound at high levels over extended periods.
■ Reduce the volume in the following cases to avoid damage.
• When playing distorted sound.
• When the speakers are receiving howling from a microphone
or record piayer, noise from FM broadcasts, or continuous
signals from an oscillator, test disc, or electronic instrument.
• When adjusting the sound quality.
• When turning the unit on or off.
Positioning for best effect
How you set up your speakers can affect the bass and the sound
field. Note the following points.
• Place speakers on flat secure bases.
• Placing speakers too close to floors, walls, and corners can result
in excessive bass. Cover watts and windows with thick curtain.
Caution
• Use the speakers only with the recommended system.
Failure to do so may lead to damage to the amplifier
and/or the speakers, and may result in the risk of fire.
Consult a qualified service person if damage has
occurred or if you experience a sudden change in
performance.
« Do not attempt to attach these speakers to walls using
methods other than those described in this manual.
i
Q)
Щ