Panasonic SC-HT70 - Manual (Page 41)

You can use the remote control to operate a Panasonic television
or video deck.
A Operating a television
Switching to TV operation mode
Press [TV].
The button lights.
The main unit also switches to TV.
Turning the TV on
Press [Ci)].
Changing channels
Press [CHANNEL (A or V)].
You can also use the numbered buttons to select the channel.
For channels 10 or over, press [SIO/-/- -] then the two digits.
10ch:[>10/-/--]-^[1]-»[0]
11 ch: [¿10/-7--]^ [1]^[1]
Adjusting the volume
Press [TV VOL (- or +)].
Switching the television’s video input mode
Press [TV/AV].
B Operating a video deck
Switching to VCR operation mode
Press [VCR].
The button lights.
The main unit also switches to VCR.
Turning the video deck on
Press [cb].
Changing channels
Press [CHANNEL (A or V)].
Channels 1 to 10 can also be selected with the numbered buttons.
[0] selects channel 10.
Starting play
Press [PLAY ►].
Fast-forwarding and rewinding
Press [SLOW/SEARCH or ►►)].
To stop play
Press [STOP M ]•
riBna
• Some models cannot be operated by this remote control.
• To prevent accidental operation, press [DVD/CD] to light the
button after operation so the remote control is ready to
operate the main unit
m
■ C-
.2
ti
:::C:
#
S
o
Si
RQT5782