Panasonic SC-HT70 - Manual (Page 33)

Sound field
Remote control only
Speaker level adjustments
If the level of the speakers appears to be different while listening to
a source, sit where you would normally and perform the following to
adjust the level of all the speakers to the same apparent level.
Preparations
To adjust Dolby Digital
Press [DVD/CD],
Turn other sound field systems off.
To adjust Dolby Pro Logic
Press [DD PRO LOGIC].
Select any source other than the radio.
1 Press [TEST] to output a test signal.
The test signal Is output in the following order,
Dolby Digital
L; Front speaker (left)
C; Center speaker
R: Front speaker (right)
RS; Surround speaker (right)
LS: Surround speaker (left)
m No signal is output for the subwoofer.
Dolby Pro Logic
L: Front speaker (left)
C; Center speaker
R; Front speaker (right)
S; Surround speaker
* No signal is output for the subwoofer.
2 Press [VOLUME (+or-)] to set the
volume level normally used for
enjoying the source.
3 Press [A] or [▼] to adjust the level of
each speaker to the same apparent
level.
To stop the test signal
Press [TEST].
To adjust speaker level during play
1. Press [CH SELECT] to select the speaker channel.
In Qo).by-DiQii3i
L^C—R—RS-
t____________
LS
_1
In Dolby Pro Logic
L^C—R—S
t_________ i
2. Press [A] or [V].
m
§
f
&
'iOs®
;.||g
•S
'IL'
§
.®!3®
®ti-
§
■ ® o s
to
FIQT5782