Safety precautions, Region numbers, Placement – Panasonic SC-HT70 User Manual
Page 5: Ac mains lead protection, Foreign matter, Service, For australia and n.z, For others, Mifflaldg, Mtoltagc
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

safety precautions
Region numbers
Placement
Set the unit up on an even surface away from direct sunlight, high
temperatures, high humidity, and excessive vibration. These
conditions can damage the cabinet and other components, thereby
shortening the unit’s service life.
place it at least 15 cm away from wall surfaces to avoid distortion
and unwanted acoustical effects.
Do not place heavy items on the unit.
Mtoltagc
Do not use high voltage power sources. This can overioad the unit
and cause a fire.
Do not use a DC power source. Check the source carefully when
setting the unit up on a ship or other place where DC is used.
AC mains lead protection
Ensure the AC mains lead is connected correctly and not damaged.
Poor connection and lead damage can cause fire or electric shock.
Do not pull, bend, or place heavy items on the lead.
Grasp the plug firmly when unplugging the lead. Pulling the AC
mains lead can cause electric shock.
Do not handle the plug with wet hands. This can cause electric
shock.
Foreign matter
Do not let metal objects fall inside the unit. This can cause electric
shock or malfunction.
Do not let liquids get into the unit. This can cause electric shock or
malfunction. If this occurs, immediately disconnect the unit from the
power supply and contact your dealer.
Do not spray insecticides onto or into the unit. They contain
flammable gases which can ignite if sprayed into the unit.
Service
Do not attempt to repair this unit by yourself. If sound is interrupted,
indicators fail to light, smoke appears, or any other problem that is
not covered in these instructions occurs, disconnect the AC mains
lead and contact your dealer or an authorized service center.
Electric shock or damage to the unit can occur if the unit is repaired,
disassembled or reconstructed by unqualified persons.
Extend operating life by disconnecting the unit from the power
source if it is not to be used for a long time.
Region numbers are allocated to DVD players and software
according to where they are sold.
DVDs can be played on this unit if their region number is the same
or includes the same number, or if the DVD is marked "ALL”.
Confirm the region number for this unit before choosing discs. The
number for this unit is indicated on the rear panel.
Example
For the United Kingdom and Continentai Europe
Region numbers supported by this unit
•The region number of this unit is “2".
•You can play DVDs marked with
labels containing “2" or “ALL”.
For Australia and N.Z.
Region numbers supported by this unit
•The region number of this unit is “4".
•You can play DVDs marked with
labels containing “4" or “ALL”.
For Others
Region numbers supported by this unit
•The region number of this unit is "5”.
•You can play DVDs marked with
labels containing “5” or “ALL".
This system can playback discs bearing any of the marks;
nCOMWCT n COMPACT
MifflalDg®
V I D E O
This system does not have a DTS decoder so it cannot play audio
encoded with DTS.
This system can not play the following discs
• DVD with an
unsuitable region
number
• OVD-Audio
• DVD-ROM
• DVD-R
• DVD-RAM
• +RW
• DVD-RW
• DIVX Video Disc
• CD-ROM
• VSD
• CDV
• CO-G
• CVD
• SACD
• SVCD
• Photo CD
etc.
Disc symbols used in these operating
instructions
The functions you can use depend on the type of disc you play.
These marks are used to indicate which type of disc is explained.
Feature can be used with DVD-Video
Feature can be used with video CD
Feature can be used with audio CD
Some features cannot be used even if these
symbols are indicated.
m
m
Ш:
Ф
О
GQ