Leica Geosystems Leica 3D Disto - Manual - Manual (Page 95)

95 3D Disto, Operation
9. Proceed as described previously to measure the ceiling.
10. Press to undo the last command.
11. Press to redo the last command.
12. Press or and to clear measurements and results.
13. Press to choose between save, save as, clear screen, close measurements
without saving.
8. To measure the room
height select a floor
point in the sketch
area. Then target and
measure the ceiling
corner above it.

Please note that the sketch shows a foot print view. Measured floor
and ceiling points may cover each other. Use
or to select points
and results.