Leica Geosystems Leica 3D Disto - Manual - Manual (Page 42)

3D Disto, Description of the System 42
Software
application
licensing and
activation The application programs can be activated by starting the Demo mode or by entering
the license key using one of the following methods:
• Synchronisation with the MyWorld homepage on
www.leica-geosystems.com:
2. If the Control Unit does not recognise the PC connection automatically,
press or connect in the Menu settings.
3. If the connection works, start your internet browser and go to the MyWorld
homepage. Register your product by entering the equipment number that can be
found on the data label below the laser distance metre. Refer to "Labelling
3D Disto".
4. Choose the MyProduct page and press the download key for licenses.
5. A Windows pop-up prompts to save the license key file. Save the file in the
Licence folder on your Control Unit.
1. Press and connect the Control
Unit to the PC by Micro-USB cable.
The Control Unit is available as a
removable drive on your PC.
3D Disto_011