Leica Geosystems Leica 3D Disto - Manual - Manual (Page 109)

109 3D Disto, Software Applications
Comfort plumbing
step-by-step 1. Start application in Menu » Applications » Tool Kit.
2. An empty sketch opens. The running application stays open in the background.
3. Press on the Toolbar.
4. Viewfinder opens. Target and measure the point to be plumbed. Press .
5. Viewfinder stays open. Roughly target expected plumb and press .
6. If plumb is found the laser flashes to indicate the exact position.
7. Press to close Tool Kit.

Refer to "8 Error Messages" for information about possible error
messages.