Leica Geosystems Leica 3D Disto - Manual - Manual (Page 167)

167 3D Disto, Software Applications
7.5.2 Targeting and Layout with RM100 Remote Control
Description The functionality of the RM100 Remote Control is the same as in the other applica-
tions. The RM100 Remote Control only works if the Control Unit is ON - otherwise
measurement errors cannot be displayed and avoided.
Functionality of
the keys in
Projector
application Red key :
• Press to activate laser and a second time to project or measure a point within
the reference area.
Short key press on / / / :
• Each arrow key selects the neighbouring point, turns the 3D Disto and starts the
iterative measurement. Press once to activate the remote control and a second
time to execute the command.