Leica Geosystems Leica 3D Disto - Manual - Manual (Page 117)

117 3D Disto, Software Applications
Height tracking
step-by-step 1. Start application in Menu » Applications » Tool Kit.
2. Press on the Toolbar.
3. Viewfinder opens. Target and measure a reference point at the same horizontal
distance as the point you would like to measure indirectly.
4. Viewfinder stays open and measured point is displayed.
5. Target the point you would like to measure indirectly as exact as possible. The
height difference to the reference point is displayed and updated in real-time in
the results window.
6. Close the Viewfinder to finish the application.

Do not move the 3D Disto horizontally too much after reference point
has been measured, otherwise the result will be incorrect.