Leica Geosystems Leica 3D Disto - Manual - Manual (Page 68)

3D Disto, Instrument Setup 68
All settings on the setup screen can also be changed through the menu:
Choose Menu » Device.
•
Connect 3D Disto to connect by WLAN, USB cable, or disconnect Control Unit.
• WLAN channel to switch between different channels if connection does not
work.
• Connect PC to allow data transfer.
• Display to change display settings.
• Tilt sensor to activate/deactivate the tilt sensor.
• Theft protection to protect instrument with security PIN.
• Calibration to check and adjust. Refer to "9 Check & Adjust" for more informa-
tion.
• Software to update software, to check software version on the Control Unit and
the 3D Disto or to enter/activate the software license key.

Choose ON when working in harsh construction environment with
many shocks and vibrations, apart from that choose ON (sensitive).