Leica Geosystems Leica 3D Disto - Manual - Manual (Page 90)

3D Disto, Operation 90
7. Press to take pictures for documentation purposes. They are stored with
name, point ID, date, and time information.
8. Press in dark conditions to change Viewfinder picture to edge mode. Edges
and corners will be highlighted in black. Only available in Microsoft Windows
version.
9. Press to choose between different turn commands:
• Turn 90° right
• Turn 90° left
• Turn ?°: Enter the horizontal angle by which the 3D Disto should turn.
• Horizon: 3D Disto goes to 0% slope in horizontal position.
• Plumb up: This option can be used to plumb up a point by setting up the
3D Disto exactly over it. Just mark a cross on the floor. Ensure that the lines of
the cross are at exactly 90° to each other and long enough to be seen when
setting up the instrument above. Use the 90° markings on the 3D Disto socket
for centering.

Please note that there are vertical and horizontal deviations in the
movements. Do not use the turn commands for stake-out or align-
ment. Please work with the Tool Kit instead.