DVR systems NVR38xx Series User Manual
Page 96
96
\
Figure 8-25 Network
Parameter
Function
Remote
host
PPPOE
Input the user name and password which ISP(Internet service supplier)
provided and chose enable.
Reboot system after configuration is saved and the device will auto connect
to Internet. The IP address is the WAN IP.
There are two conditions for reboot,
1. The user must have the authority to reboot device.
2. There is no user login the system menu on the local end
After PPPOE dial succeed, get the current IP address and visit this IP
address via WEB.
The email interface is shown as in Figure 8-26.
This manual is related to the following products: