DVR systems NVR38xx Series User Manual
Page 118
118
Figure 8-49 Alarm
Please refer to the following sheet for detailed information.
Type
Parameter
Function
Alarm
Type
Video loss
System alarms when video loss occurs.
This function is not available in current device.
Motion detection System alarms when motion detection alarm
occurs,
This function is not available in current device.
Disk full
System alarms when disk is full.
Disk error
System alarms when disk error occurs.
Camera masking System alarms when camera is viciously masking.
This function is not available in current device.
External alarm
Alarm input device sends out an alarm.
Operation
Listening alarm
System notifies web when alarm occurs (you select
from the above event type), and then web can
notify user.
Video
When alarm occurs, system auto enables video
monitor.
This function only applies to video detection alarm
(motion detection, video loss and camera masking).
This function is not available in current device.
Prompt
Automatically pops up alarm dialogue box.
Sound pop up
System sends out alarm sound when alarm occurs.
You can specify as you wish.