beautypg.com

DVR systems NVR38xx Series User Manual

Page 136

background image

136

• Domain Name: Enter the domain name created in step 8.

• User: Enter your username (email address) created in step 3.

• Password: Enter the password created in step 3.

The figure Configuration file of No-IP is shown as in Figure 14-11.

Figure 14-11

12. Now you have completed device setup. Open Internet Explorer ® in another foreign network with Internet

access, unlike the network where the device is connected to, you need to follow the steps listed below:

1. Enter the address into your browser: http://nome the field created in step 8. For example:

http://vd16s480st.no-ip.biz

2. If the device HTTP port is 80, just type the domain name. Otherwise, enter in the browser address as:

http://nome the field created in Step 8: port number of HTTP. For example:

http://vd16s480st.no-ip.biz:9090

3. Press Enter. The system will ask install application webrec.cab control or not. Please click Yes to perform a

successful connection.

4. If the page does not appear on the computer screen, you need to lower your system safety setup. From

Tools> Internet Options> Security, select Internet and then click Custom Level, you can enable ActiveX

controls. See Figure 14-12 . Then open your browser and re-enter the domain name of the device.

This manual is related to the following products: