DVR systems NVR38xx Series - Manual (Page 70)

70
There are three statuses: schedule/manual/stop. Please highlight icon “ ○ ” to select
corresponding channel.
 Manual: The highest priority. After manual setup, all selected channels will begin ordinary
recording.
 Schedule: Channel records as you have set in recording setup (Main
Menu->Setting->Schedule)
 Stop: All channels stop recording.
Figure 6-62
6.7.4.3 Enable/disable record
Please check current channel status: ―○‖ means it is not in recording status, ―●‖ means it is in
recording status.
You can use mouse or direction key to highlight channel number. See Figure 6-63.
Figure 6-63
6.7.4.4 Enable all channel recording
Highlight ○ below All, you can enable all channel recording.
 All channel schedule record
Please highlight ―ALL‖ after ―Schedule‖. See Figure 6-64.
When system is in schedule recording, all channels will record as you have previously set
(Main menu->Setting->Schedule).
The corresponding indication light in front panel will turn on.