Alarm output, Manual record, Manual record menu – DVR systems NVR38xx Series User Manual
Page 69: Basic operation
69
Figure 6-60
6.7.3 Alarm Output
Here is for you to set proper alarm output.
Please highlight icon
to select the corresponding alarm output.
After all the setups please click OK button, system goes back to the previous menu. See Figure
Figure 6-61
6.7.4 Manual Record
Note:
You need to have proper rights to implement the following operations. Please make sure the
HDD has been properly installed.
6.7.4.1 Manual record menu
There are two ways for you to go to manual record menu.
Right click mouse or in the main menu, Advanced->Manual Record.
In live viewing mode, click record button in the front panel or record button in the remote
control.
Manual record menu is shown as in Figure 6-62.
6.7.4.2 Basic operation
This manual is related to the following products: