DVR systems NVR38xx Series - Manual (Page 42)

42
Figure 6-13
6.6 Setting
In main menu, highlight setting icon and double click mouse. System setting interface is shown as
below. See Figure 6-14.
Figure 6-14
Important
Please note you need to have the proper right to implement the following operation.
6.6.1 General
General setting includes the following items. See
X357H357H357H
Figure 5-3
X
.
 System time: Here is for you to set system time
 Date format: There are three types: YYYYY-MM-DD: MM-DD-YYYYY or DD-MM-YYYY.
 Date separator: There are three denotations to separate date: dot, beeline and solidus.
 DST: Here you can set DST time and date. Please enable DST function and then click set
button. You can see an interface is shown as in Figure 6-16. Here you can set start time and
end time by setting corresponding week setup. In Figure 6-16, enable date button, you can
see an interface is shown as in Figure 5-5. Here you can set start time and end time by
setting corresponding date setup.
 Time format: There are two types: 24-hour mode or 12-hour mode.