DVR systems NVR38xx Series - Manual (Page 64)

64
Figure 6-51
In Figure 6-51, click modify button after channel. You can see an interface shown as in Figure
6-52. Please note all your modification here applies to local end only. You need to refresh web or
client-end to get the latest channel name. System max support 25-digital character.
Figure 6-52
In tour mode, you can see the following interface. On the right corner, right click mouse or click
shift button, you can control the tour. There are two icons: stands for enabling window switch
and stands for disabling window function. See Figure 6-53.
Figure 6-53
6.6.10 Default
Click default icon, system pops up a dialogue box. You can highlight to restore default factory
setup.
 Select all
 General
 Encode
 Schedule
 RS232
 Network
 Alarm
 Detect
 Pan/tilt/zoom
 Display
 Channel name