DVR systems NVR38xx Series - Manual (Page 48)

48
Figure 6-22
6.6.5.1 Advanced Setup
Advanced setup interface is shown as in Figure 6-23. Please draw a circle to enable
corresponding function and then double click current item to go to setup interface.
Figure 6-23
6.6.5.2 IP Filter
IP filter interface is shown as in Figure 6-24. You can add IP in the following list. The list supports
max 64 IP addresses.
Please note after you enabled this function, only the IP listed below can access current NVR.
If you disable this function, all IP addresses can access current NVR.
Figure 6-24