Allen&Heath GLD-112 Reference Guide - Manual (Page 46)

GLD Touch Screen Reference V1.4 – Issue 1 46 ALLEN & HEATH
Assign SoftKeys as:
Unused – No function
Mute - For example, using DCAs as Mute Groups
Sel – Quick access to processing for a channel
Mix – Quick access to a specific Mix
PAFL – Quick access to a selected PAFL
PAFL Clear – Turns off all currently active PAFL keys
Sel, Mix , PAFL Scene – Combination on single key
Scene Recall – To instantly recall a selected Scene
Scene Next/Prev/Go – Scene recall keys
Tap Tempo - Assign to any of the 8 FX L or R tap
Custom MIDI - Transmit a custom MIDI message string
Talkback Assign - Talkback to different outputs
Level Up – Tap to increase level for faders
Level Down – Tap to decrease level for faders
Send Level Up – Tap to increase level for Aux sends
Send Level Down – Tap to decrease level for Aux sends
Custom MIDI messages
You can choose to transmit a MIDI message when a
SoftKey is pressed and/or when it is released. Touch the
message box to open the keypad to type in the required
MIDI string.
Using SoftKeys for Scene recall:
SoftKey Scene Recall – Individual SoftKeys can be
assigned to recall specific Scenes. Recall is instant. No
confirmation popup appears even if the option is set.
To recall a sequence of Scenes using a single SoftKey you
could include the SoftKey in the Scene recall and assign it
to recall a different Scene within each Scene it recalls.
Alternatively, to prevent Scene recall overwriting your
SoftKey Scene Recall settings you could make these keys
Safe in the Scene Safes page.
SoftKey Next/Prev/Go Recall – Assign SoftKeys as:
Go – Instantly recall the highlighted Scene
Next – Step to the next Scene in the list ready to recall
Prev – Step back to the previous Scene in the list
An Auto-Increment option can be set so that pressing Go
recalls the highlighted Scene and then steps to the next in
the list ready to recall when Go is pressed again.
To avoid the need to open the Scene Manager screen refer
to the Current/Next status bar information when working
with the Go key. You can also set up a Cue List with the
sequence of Scenes you wish to recall.
10.5 Dimmer page
Use this page to separately adjust the brightness of the
touch screen and the Leds/LCD displays.
Pressing the Setup key for 2 seconds opens the Dimmer
screen and sets the touch screen brightness to maximum.