Allen&Heath GLD-112 Reference Guide - Manual (Page 45)

GLD Touch Screen Reference V1.4 – Issue 1 45 ALLEN & HEATH
10.3 Name & Colour Setup page
The Name & Colour Setup page lets you reset the name or
change the colour of a block of channels.
To Colour a block of channels - Select the channel type
from the Type drop-down menu. Select All or touch the
Start and End buttons to set the range of channels. Touch a
colour button. This will change the colour of the block.
To Reset a block of channel Colours – This will reset
colours to factory default. Select the channel type from the
Type drop-down menu. Select All or touch the Start and
End buttons to set the range of channels. Touch the Reset
button and confirm using the popup window. The popup
will inform you of the reset colour.
To Name and Colour individual channels – While it can
be done using this page it is quicker to press the related
strip Sel key and use the Keypad button available at the top
of the individual channel Processing screen.
To Reset a block of channel Names – This will reset the
names to their default channel number. Select the channel
type from the Type drop-down menu. Select All or touch the
Start and End buttons to set the range of channels. Touch
the Reset button and confirm using the popup window.
10.4 SoftKeys Setup page
GLD provides user assignable 'SoftKeys' on the right of the
mixer. The GLD-80 has 10 while the GLD-112 has 14 keys.
There are many different functions that can be assigned to
these keys.
To assign a SoftKey -Touch one of the SoftKey buttons on
the right of the screen to highlight it. Open the Function
drop-down menu and select the function to assign. Use the
Channel Type menu and Channel Number box to select the
channel required. Touch Apply to accept, or Cancel to keep
the current setting.
SoftKey assignments can be stored and recalled with
Scenes. We recommend you set these before you start
storing your Scenes.
Note To prevent Scene recall overwriting your SoftKey
settings you can make one, a selection or all Safe using the
Scenes / Scene Safes screen SoftKeys tab.
The SoftKeys are made Safe in the default factory Template
Shows.