Allen&Heath GLD-112 Reference Guide - Manual (Page 3)

GLD Touch Screen Reference V1.4 – Issue 1 3 ALLEN & HEATH
1. Power Up Screens
The Home screen will appear on power up If no password
is set.
The Login screen will appear when you:
Power up when the current User has a password set
Unlock the surface when a password is set
Change user from the Home screen
Users List
The list shows available Users. The Admin User is always
displayed. Up to 9 other Users that have been made ‘Active’
by Admin will also display in the list. Icons show if the User
has a password or User Scene set.
Password – If one is set it needs to be entered using the
screen keypad when the user logs in.
User Scene – If a User Scene is set it is recalled
automatically on login when the user is changed. It does
not recall when the same user logs in, or when the system
is powered up again while the same user is current.
A User Scene can be set by Admin to ensure a pre-
determined layout and starting point loads when a different
user logs in.
Permissions – Access to selected functions and
parameters can be restricted for each User. This is
configured by Admin using the Setup screen.
Not Shut Down Correctly reminder screen
If the GLD was last switched off without it being first shut
down using the Home screen Power Down button this
screen will appear on power up. The GLD will continue to
boot after a 10 second count down. Choose to start
immediately using the Start GLD button, or go to the
Advanced page if you wish to fully reset the system.