Garmin GPS 89 - Manual (Page 31)

The route action fields, located at the bottom of the route
definition page, allow you to clear, invert and activate the
routes stored in the GK 89.
To clear a route;
I.Press A tobegin entry of the route number.
I Enter the route number and press 4B.
3. Select the XLIT field and press A.
A warning page will appear, asldng you to confirm that
you want to remove all waypoints from the route.
1. Highlight the Yes' field with the i key and press .
1 Press V to return to the menu page.
AcUvaling or liivertiiig a Boutc
After a route has been entered in the GPS 89, it can be
activated in its defined sequence or inverted (in reverse
order). The process of activating or inverting a stored route
takes a storage route (routes 1-19) and copies it into the
active route (route 0) for navigation.
This system allows you to have an active route that you
may edit during navigation and save as an entirely new route
from the original. You will have to copy the active route to an
unused storage route to save it. since new route or TracBack
activation overwrites route 0.
To activate a ronte:
1. Select the route definhion page and press the 41 key to
actívale the route number field.
2. Enter the route number to be activated and press 4.
3. Highlight the 'ACT field and press 4.
Inverting a route allows you to navigate route legs in
reverse order without editing the original route.
To activate a route in inverted order;
1. Foilcw the same steps as above, but selectibe W com­
mand field and press the 4 key.
CLEftft RflOTE~
HARHIHm
aU waypoints
will bo removed
trom this rout«
Hr« you sur«
Vos? OP
i
:
bm
To dear a mute, highli^lu
the Yt!?“ prompt and pmss
ENTER.
KOUTE. 1
i*ac TO KHKO
гТЕ 44
DTT 51
¡H jteVMiT OTit ут
1 KOJO
5 KFOE
3 KHKO
4 _____
I_____
i_________
T ШИШ 1 35.Д
copy
TO:____
CLKY IHU? Ш1
To attivale a route, high-
(iglit the ‘ACT?’ prompt and
ptesi ENTER.
27