Welch Allyn Connex Vital Signs Monitor PMP Tab Instructions - Quick Reference Guide - Manual (Page 14)

Error condition Definition / Description Required action
Clinician ID required to save data. Device requires Clinician ID to
manually save.
Click the OK button to dismiss the
message.
Patient ID required to send data. Device requires Patient ID to send
data.
Enter the Patient ID.
No matching patient ID found. Query or search for patient
information using patient ID did not
return a match.
Click the OK button to dismiss the
message.
Patient list full. Unable to add patient since the list
is at maximum capacity.
Need to delete patient data from
the list, then you will be able to add
more patient data.
Audio alarms are off. This message is used with alarm
limit control icons to indicate to
user that audiois off.
Click the OK button to dismiss the
message.
Advanced settings unavailable. Device conditions do not allow
access to advanced settings or
Administrative mode, which occurs
when sensors are active,
physiological alarm conditions
exist, or spot data is not saved.
Click the OK button to dismiss the
message.
Records are printing. While printing is in progress, this
informational message indicates
total numberof records printing.
Click the OK button to dismiss the
message.
Click the Cancel button to interrupt
printing.
Click the OK button to dismiss the
message.
External device not recognized. External device, barcode scanner,
not licensed for use.
10 PMP alarm codes