Welch Allyn 408 Micropaq Monitor - User Manual - Manual (Page 82)

78 Index Welch Allyn Micropaq Monitor
Reconnect a recently monitored patient , 31
Reconnection to network , 8
Recycling
Batteries , 47
Monitor , 47
Red LED , 10
Replace the battery , 43
Respond to equipment alert , 38
Respond to patient alarms , 36
RF warning, exposure , 5
Room selection , 21
Routine maintenance , 43
S
Scroll Up/Down Keys , 10
Select
Patient , 20
Room , 21
Select Patient at Central , 20
Select Room at Central , 21
Select Key , 11
Select Room at Central , 32 , 33
Set patient alarms , 37
SET technology, Masimo , 7
Settings, operating , 51
Shock and SpO2 , 27
Silence Alarm/Alert Key , 11
Silence alarms , 36
Simulation
see Demo Mode
Site preparation for ECG , 21
Sleep mode, display , 12
Snapshot Key , 10
Specifications , 52
Alarms , 58
Battery , 60
Battery charger , 61
Display , 59
Environmental , 59
Physical , 60
SpO2 , 56
SpO2
Alarm holdoff (delay) , 35
Anemia , 27
Arterial occlusion , 27
Cardiac arrest or shock , 27
Hypotension , 27
Hypothermia , 27
Light interference , 27
Monitoring , 26
Monitoring and defibrillation , 26
Motion interference , 27
Specifications , 56
Vasoconstriction , 27
Warnings , 26
While monitoring NIBP , 27
Stop monitoring a patient , 30
Symbols, display , 12
System error , 40
T
Training
see Demo Mode
TRANSFER , 13 , 33
Transfer a patient to new room , 33
U
Unassigned rooms , 21
UNRECOGNIZED SPO2 SENSOR , 40
V
Vasoconstriction and SpO2 , 27
Venous pulsations and SpO2 , 26
VERY LOW BATTERY message , 40
Volume of audible indicators , 10
W
Warnings
General , 4
SpO2 , 26
Warranty service , 6
Waveform display options , 15
Wireless
Warnings about limitations , 4
Wireless Local Area Network
see WLAN
WLAN , 1 , 8
Y
Yellow LED , 10