Welch Allyn 408 Micropaq Monitor - User Manual - Manual (Page 50)

46 Chapter 5 Maintenance Welch Allyn Micropaq Monitor
Clean the accessories
Clean accessories per manufacturer’s instructions.
Approved cleaning solutions
Prohibited cleaning solutions
WARNING Do not autoclave the accessories. Never immerse the accessories
in liquid unless the accessory manufacturer explicitly instructs you to do so.
Brand names Generic
Wex-cide ® a
a. Wex-cide (Wexford Labs, Inc. Kirkwood, MO) is a disinfectant that meets OSHA requirements, is EPA approved, and will not harm
the outside of the monitor, battery, or battery charger. Wipe away disinfectant after the manufacturer’s recommended period.
Warm water
Sani Cloth ® b
b. Sani-Cloth Wipes are proven effective in 5 minutes or less. Sani-Cloth Wipes are EPA-registered and meet CDC and OSHA guidelines.
They are an adequate substitution for Theracide™ Disinfectants.
Liquid soap
Hydrogen peroxide solution
Caution Use only cleaning solutions that are recommended by Welch Allyn for
this equipment. Use of solutions that are not recommended or that have a high
acid content or are otherwise inappropriate can cause damage to the equipment,
including cracking and deterioration of the plastic case. Do not use these
solutions or similar products. If your cleaning solution is not on the approved or
prohibited cleaning solution lists, check the cleaning solution ingredients to
ensure that nothing listed in the prohibited cleaning solutions is a constituent
element. If you are unsure whether a cleaning solution should be used, defer to
the approved cleaning solutions list.
Brand names Generic
Coverage ® Butyl alcohol
Cidex Plus ® Denatured alcohol
Freon ™ Acetone
Vesphene ® Chlorine bleach solution
Enviroquat ® 70 percent isopropyl alcohol
Staphene ® Trichloroethane
Misty ® Trichloroethylene
Virex ® Glutaraldehyde
Formula 409 ®
Fantastik ®
Ovation ®
TBQ ®
Windex ®