Rice Lake SCT-10 - Manual (Page 43)

Operation 39
The output status can be read at any time but can be set (written)
only if the output has been set as or (see Section 2.6 “Outputs And
Inputs Configuration” on page 26); otherwise, the outputs will be
managed according to the current weight status with respect to
the relevant setpoints.
Divisions And Units Measure Registry (40014)
This register contains the current setting of the divisions (parameter dI UI S ) and
of the units of measure (UnI t parameter).
Use this register together with the Coefficient registers to calculate the value
displayed by the instrument.
Inputs Register (40025)
(Read Only)
Outputs Register (40026)
(Read And Write)
Bit 0 INPUT 1 Status Bit 0 OUTPUT 1 Status
Bit 1 INPUT 2 Status Bit 1 OUTPUT 2 Status
Bit 2 Bit 2
Bit 3 Bit 3
Bit 4 Bit 4
Bit 5 Bit 5
Bit 6 Bit 6
Bit 7 Bit 7
Bit 8 Bit 8
Bit 9 Bit 9
Bit 10 Bit 10
Bit 11 Bit 11
Bit 12 Bit 12
Bit 13 Bit 13
Bit 14 Bit 14
Bit 15 Bit 15
H Byte L Byte
Units of measure division
Note