Rice Lake SCT-10 - Manual (Page 11)

Introduction 7
1.5 LED and Key Functions
* To activate the secondary LED function, during weight display press and hold
, then press .
The LEDs light up in sequence to indicate that a setting and not a
weight is being viewed.
LED Main function Secondary function *
NET Net weight LED: net weight display (semi-
automatic tare or preset tare) LED lit: input 1 cosed
Zero LED (deviation from zero not more than +/-
0.25 divisions) LED lit: input 2 closed
Stability LED LED lit: output 1 closed
kg Unit of measure: kg LED lit: output 2 closed
g Unit of measure: g No meaning
L Unit of measure:lb No meaning
Key Short press
Long press
(3 sec) Into menus
Escape
Zero Setting Cancel or return to previous
menu
Scroll/
Backspace
Captures Tare
Gross
 Net
Removes Tare
Net
 Gross
Select figure to be modified or
return to previous menu item
Next/ Data
Entry
mV load cell
test Modify selected figure or go
to next menu item
Enter
Setting setpoints
and hysteresis Confirm or enter in submenu
+
Setting general parameters (press and hold then press
to enter set-up menu.
+
Setting preset tare (press and hold then press to enter
set-up menu.
MENU PRINT
0
ESC
TARE
PRINT
MENU
MENU
0
ESC MENU
0
ESC
MENU TARE MENU TARE
Note