Rice Lake SCT-10 - Manual (Page 24)

20 SCT Weight Transmitter Operator’s Manual
2.3 Zero Parameters
1. Press and hold , then press . CALIb will be displayed.
2. Press or until PArA 0 is displayed, press .
3. Press or until desired parameter (see Table 5 ) is displayed,
press . The currently programmed value is displayed and LED’s
will be scrolling.
4. Press or until desired value is displayed, press .
5. Press twice to exit set-up menu.
Parameter Choices Description
0 SEt
Enter #
0-max full scale
300 *
Considered decimals: 300
– 30.0 – 3.00 – 0.300 Resettable Weight setting for small
weight change.
Indicates the maximum weight value
resettable by external contact, keypad or
serial protocol
AutO 0
Enter #
0 - max 20% of full scale
0 * Automatic zero setting at power-on
If when indicator is powered on the
weight value is lower than the value set
in this parameter and does not exceed
the 0 SEt value, the weight is reset.
To disable this function set to 0.
trAC 0 nOnE *
1-5
Zero tracking
When the zero weight value is stable
and, after a second, it deviates from zero
by a figure in divisions smaller or equal to
the figure in divisions set in this
parameter, the weight is set to zero.
To disable this function
, set to none
Example: if the parameter dI UI
S
is
set to 5 and trAC 0 is set to 2, the
weight will be automatically set to
zero for variations smaller than or
equal to 10 (dI UI S x trAC 0 ).
*
- indicates default value.
Table 2-5. Zero Parameters Settings
MENU
0
ESC
TARE PRINT MENU
TARE PRINT
MENU
TARE PRINT MENU
0
ESC