Rice Lake PR5220 Ethernet Transmitter - Manual (Page 85)

PR 5220 Instrument Manual Commissioning
Sartorius EN-85
4.6.5 Adjustment Sequence
During calibration, no data is changed in the digital load cells. The calibration data and parameters are saved
in the instrument. The unique serial numbers of the connected load cells are monitored.
For the adjustment is the following order specified:
• Search for load cells, see Chapter 4.6.6.
• Assign load cells, see Chapter 4.6.7.
• Calibrate ‘New’: Max with weight unit, scale interval, dead load, calibration weight, see Chapter 4.6.8.
Note:
For further information about calibrating weighing points, see Chapter 4.4.
4.6.6 Search for Load Cells
Weighingpoint
Weighingpoint A Pendeo Load Cells
Press [Assign]. Setup Config Param Assign
Weighingpoint/ WP A
Type Pendeo process
No of LC 1
LC 1 0
Press [Search]. Search View Calib
?
Search for connected load cells.
The actual settings are reset to
default.
Cancel Continue
Press [Cancel] to accept and display the existing values.
Press [Continue] to start a new search process.