Rice Lake PR5220 Ethernet Transmitter - Manual (Page 101)

PR 5220 Instrument Manual Commissioning
Sartorius EN-101
4.7.4 Network Parameters
You can configure settings for the network connections (built-in LAN adaptor).
Define the network parameters under -[ Network parameter ].
Setup/ Operating parameter
HW address 00:90:6C:6A:6B:5E Fixed address determined by the instrument.
Hostname PR 5220- 6A6B5E The device name can be defined* by the user.
Use DHCP
The address is assigned by the server.
IP address 172.24.21.82 The address is assigned by the server.
Subnetmask 255.255.240.0 Mask for the permissible IP address range
Standardgateway 172.24.16.1 IP number for the gateway
Remote access
VNC-Client 255.255.255.255 Permitted client for instrument operation
[Hostname]
Caution!
The host name must be unique in the network!
* The device name [Hostname] is subject to the following restrictions:
- Minimum number of characters: 2, maximum number of characters: 24
- The first character must be a letter. Spaces are not permitted.
- 0-9, A-Z (upper and lower case letters are not distinguished) are permitted.
- - or . may be included, but neither at the end nor in succession.
[Use DHCP]
If the checkbox has been marked, the server defines the IP address automatically.
[VNC-Client]
You can configure access permissions for the address:
VNC-Client 0.0.0.0. Access over VNC not permitted
VNC-Client 172.24.21.101 Access only from client machine with this address
VNC-Client 172.24.21.255 Access from any client with address within range 172.24.21.1 - ..254
VNC-Client 255.255.255.255 Access from client with any address
Note:
When setting [IP address], [Subnet mask] and [Standard gateway], please consult with your network
administrator.