Rice Lake PR5220 Ethernet Transmitter - Manual (Page 52)

Commissioning PR 5220 Instrument Manual
EN-52 Sartorius
- Interface settings
- Communication type SBI protocol, xBPI protocol
- Baudrate for SBI 150 baud, 300 baud, 600 baud, 1200 baud, 2400 baud, 4800 baud,
9600 baud, 19200 baud
- Parity for SBI Mark, Space, Odd, Even
- Stopbits 1 stopbit, 2 stopbits
- Handshake Software handshake, CTS with 2 chr.pau = CTS with 2 characters,
CTS with 1 chr.pau = CTS with 1 character
- Data output interval with each display, after 2 updates, after 5 updates,after 10 update,
after 20 updates, after 50 updates, after 100 updates
- Parameter change can be changed, cannot be changed
- Select specification group
- Specif. group 1 …6 Select specification group of the scale (see operating manual of the relevant
scale)
- Show device info
- Set user User name of the connected device
- Set SBN Address for xBPI at an interface must be <0 >, because there is no bus
operation.
- Config
- Type xBPI-Scale
- W&M , OIML, NSC, NTEP
- Tare timeout 0.1 s ... <2.0 s> ... 25 s,
- Serial number <0>, if >0, the serial number is checked (with verified scale)
- SBN Address <0 > no bus operation.
- Param
- Assigned to xBPI-Port 1
- Baudrate Transmission rate: <9600>, 19200, 38400
- Bits 8
- Parity odd
- Stopbits <1>, 2