2 troubleshooting, 3 acronyms and glossary of terms – Rice Lake MSI-8000 RF Remote Display - ScaleCore Configuration Management Program (ScCMP) User Manual
Page 39

Appendix
35
8.2 Troubleshooting
The following troubleshooting reference is intended to help with common problems related to the ScCMP
application. It is not a comprehensive solution for every problem.
Table 8-1. Troubleshooting Table
Problem
Solution
The application does not start?
• Verify the application has been installed correctly.
• Confirm installation requirements.
• Verify an instance of the application is not already running.
There are no serial ports listed when
making a serial connection.
• Confirm you are running the application on a compatible version of Windows.
• Confirm there are serial ports available on the installed platform.
• If using USB to serial converters, verify the device driver was correctly installed for the
The application is not connecting to
my RS-232 device.
• Verify the device is turned on.
• Verify serial communications settings in both the application and the device.
• Some ScaleCore devices require the radio be turned off for the serial port to operate.
The application is not connecting to
my Ethernet/802.11 device.
• Verify the device is turned on.
• Try using a ping tool to attempt to verify access to the device.
• Check firewall and router configuration.
8.3 Acronyms and Glossary of Terms
Following is a list of acronyms and terms used throughout this document.
Table 8-2. Acronyms and Glossary of Terms
Term
Definition
802.3
The IEEE standard for wired Ethernet.
802.11
The IEEE standard for wireless Ethernet.
ADC
Analog to Digital Converter.
AZM
Auto Zero Maintenance.
COZ
Center of Zero.
DAC
Digital to Analog Converter.
LC
See Load Cell.
LED
Light Emitting Diode.
Load Cell
A transducer that is used to conver a force into electrical signal.
Math (Sensor)
A sensor type that uses math functions to combine multiple load sensors into one value.
RS-232
Serial Communications Protocol.
SC
ScaleCore. A family of products by Measurement Systems International.
SC Device
A term referring to a physical ScaleCore family weighing product.
SCCMP
ScaleCore Configuration Management Program.
ScaleCore
A family of weighing products by Measurement Systems International.
Setpoint
A standard function in ScaleCore products to monitor load thresholds.
TCP/IP
Transmission Control Protocol / Internet Protocol.
- MSI-7300 Dyna-Link 2 - ScaleCore Configuration Management Program (ScCMP) MSI-4260 Port-A-Weigh - ScaleCore Configuration Management Program (ScCMP) MSI-3460 Challenger 3 - ScaleCore Configuration Management Program (ScCMP) MSI Tension Dynamometers - ScaleCore Configuration Management Program (ScCMP) MSI Indicators/Remote Displays - ScaleCore Configuration Management Program (ScCMP) MSI Crane Scales - ScaleCore Configuration Management Program (ScCMP) Crane Scales - ScaleCore Configuration Management Program (ScCMP)